- Linear Actuator
- Control Box
- Switches
- New Energy - Comprehensive Field
- New Energy Drive - Application Scenarios
- Ballscrew Pair
- Photovoltaic and solar thermal mounting system
- Tracking control
- Weather station
- Photovoltaic carport
- Power plant operation and maintenance, technical transformation
- Integrated Photovoltaic Storage and Charging
- Highland, high-altitude series
- Fisherman's light, salt light, and agricultural light complement each other
- Tea light and medicine light complement each other
- Anti-fine sand series
- Stepped slope series
- Extreme cold products
- Floating solar power
Please select
Please select
Duty Cycle 10%-25%【Exposed to Weather】
Duty Cycle 50%-100%【Exposed to Weather】
Please select
up one level
≤ 2500N
≤ 4500N
≤ 8KN
≤ 15KN
≤ 20KN
Precise Control【Servo Motor】
Standard Control【Brushed/ Brushless DC/ AC Motor】
Please select
up one level
≤ 8KN
≤ 20KN
≤ 8KN
≤ 20KN
Dual-axis bracket - 80 square meters
Bracket Area Range: 75-85 square meters
Azimuth Tracking: ±100°
Elevation Tracking: 0-50°
Maximum Wind Resistance: Meets project requirements
Drive Type: Dual push rod + rotation
Pile Foundation Type: Steel piles
Dual-axis bracket - 50 square meters
Bracket area range: 45-55 square meters
Azimuth tracking: ±100°
Elevation tracking: 0-50°
Maximum wind resistance: Meets project requirements
Drive type: Push rod + rotation
Foundation type: Steel piles
Dual-axis bracket - 30 square meters
Bracket area range: 25-35 square meters
Azimuth tracking: ±100°
Elevation tracking: 0-50°
Maximum wind resistance: Meets project requirements
Drive type: Dual push rod or push rod + rotation
Foundation type: Steel piles
Dual-axis bracket - 10 square meters
Bracket area range: 5-15 square meters
Azimuth tracking: ±100°
Elevation tracking: 0-50°
Maximum wind resistance: Meets project requirements
Drive type: Dual push rod or push rod + rotation
Pile foundation type: Steel piles
Photothermal bracket - 30 square meters
Azimuth tracking: ±150°
Elevation tracking: 0-90°
Maximum wind resistance: Based on wind tunnel data
Drive type: Dual push rod or single push rod + rotation
Foundation type: Steel piles
Tracking Angle Range: ± 45°
Main Shaft Tilt Angle: 10°~30°
Power Supply Method: AC or string power supply
Signal Mode: 485 full closed-loop control
Foundation Type: Driven pile / Cement foundation
Structural Material: Hot-dip galvanized / Pre-galvanized / Magnesium-aluminum-zinc coated steel
Wind Resistance Design: According to project site wind speed
Single-axis tracking mounting structure with tilt angle
Tracking Angle Range: ± 45°
Panel Tilt Range: 7-15°
Power Take-off Method: AC or String Take-off
Signal Mode: 485 Full Closed-Loop Control
Foundation Type: Driven Pile / Cast-in-place Pile / Cement Foundation
Structural Material: Hot-dip Galvanized / Pre-galvanized / Magnesium Aluminum Zinc Coated Steel
Wind Resistance Design: Based on project site wind speed
Seasonal fixed adjustable bracket
Angle Adjustment Range: 5°--55°
Adjustment Method: Stepless Electric Adjustment
Maximum Wind Resistance: Meets Project Requirements
Annual Adjustment Frequency: 2-4 times
Foundation Type: Driven Pile / Cast-in-place Pile / Cement Foundation
Relative Power Generation Increase of 5%-10%
Multi-row, multi-point drive - electrically linked tracking bracket
Tracking Angle Range: ± 45°
Overall Length Limit of Tracker in North-South Direction: ≤105m
Power Supply Method: AC or String Power Supply
Signal Mode: 485 Full Closed-Loop Control
Compatibility: Main and auxiliary brackets are mutually compatible
Pile Foundation Type: Driven Pile / Cast-in-place Pile / Cement Foundation
Single-row multi-point drive - electrical linkage tracking bracket
Tracking Angle Range: ± 45°
Overall Length Limit of Tracker in North-South Direction: ≤105m
Power Supply Method: AC or String Power Supply
Signal Mode: 485 Full Closed-Loop Control
Drive Type: Servo Stepper Motor
Foundation Type: Driven Pile / Cast-in-place Pile / Cement Foundation
Wuxi Hongba Mechanical & Electrical Equipment Co., Ltd.
Add: 5 Lijiang Rd. Xinwu District, Wuxi Jiangsu China
Postcode: 214028
Copyright © 2025 Wuxi Hongba Mechanical & Electrical Equipment Co., Ltd.