Please select
Please select
Duty Cycle 10%-25%【Exposed to Weather】
Duty Cycle 50%-100%【Exposed to Weather】
Please select
up one level
≤ 2500N
≤ 4500N
≤ 8KN
≤ 15KN
≤ 20KN
Precise Control【Servo Motor】
Standard Control【Brushed/ Brushless DC/ AC Motor】
Please select
up one level
≤ 8KN
≤ 20KN
≤ 8KN
≤ 20KN
A. Optional Parameters
Rated Load: 800–5,000 N, optional
No-Load Speed: 7–40 mm/s, optional
Input Voltage: 12 V or 24 V DC, optional
Custom Stroke Length: Recommended ≤ 1,200 mm
Duty Cycle: 20% or 35%, optional; under normal ambient temperature and full-load conditions, continuous operation is recommended to not exceed 2 minutes
Lead Screw Type: Standard trapezoidal lead screw
Motor Type: Standard brushed DC motor
Signal Feedback: Optional limit‑switch signals and Hall sensors available
b. Standard Protection Features
Built‑in bidirectional limit switches that automatically cut power when the actuator reaches its fully extended or fully retracted position
Operating Temperature: -10°C to 65°C (optional ultra‑low‑temperature protection down to -40°C)
IP66 dust‑ and water‑proof rating, suitable for outdoor applications
Aluminum alloy body, stainless steel piston rod, and corrosion‑resistant zinc‑nickel plated connection ends
A. Optional Parameters
Rated Load: 1000–3000 N, optional
No-Load Speed: 4–22 mm/s, optional
Input Voltage: 12 V or 24 V DC, optional
Custom Stroke Length: Recommended ≤ 300 mm
Duty Cycle: 15%; under normal ambient temperature and full-load conditions, continuous operation is recommended to not exceed 2 minutes
Lead Screw Type: Standard trapezoidal lead screw
Motor Type: Standard brushed DC motor
Signal Feedback: Permanent Magnet DC Motor
Signal Feedback: Optional dual Hall pulse feedback or switch position signal
Operating Temperature: -25°C to 65°C
b. Standard Protection:
External Overcurrent Protection Limit Switch
A. Optional Parameters
Rated Load: ≤2000N
No-Load Speed: 3.4–30 mm/s
Input Voltage: 12 V or 24 V DC, selectable
Custom Stroke Length: Recommended ≤1000 mm
Duty Cycle: 15%; under full‑load conditions at room temperature, continuous operation is recommended to not exceed 2 minutes
Lead Screw Type: Trapezoidal Lead Screw
Motor Type: Standard DC Brushed Motor; DC Brushless Motor available as an option
Signal Feedback: Hall Sensor
b. Standard Protection
Built‑in bidirectional limit switches that automatically cut power when the actuator is fully extended or fully retracted
Operating Temperature: -10°C to 55°C Protection Rating:
IP65 Dust‑ and Water‑Proof
Aluminum Alloy Housing with a Corrosion Resistance Rating of Nss 480h
A. Optional Parameters Rated Load: 250–1,200 N (optional) No-Load Speed: 4–20 mm/s (optional) Input Voltage: 12 V or 24 V DC (optional) Custom Stroke Length: Recommended ≤ 1,000 mm Duty Cycle: 20%; under normal ambient temperature and full-load conditions, continuous operation is recommended for no more than 2 minutes Lead Screw Type: Standard trapezoidal lead screw Motor Type: Standard brushed DC motor b. Standard Protection Built-in bidirectional limit switches that automatically cut off power when the actuator is fully extended or fully retracted Operating Temperature: -10°C to 65°C (optional – optional ultra-low‑temperature protection available down to -40°C) IP66 dust‑ and water‑proof rating, suitable for outdoor use Aluminum alloy body and piston rod, with corrosion‑resistant zinc‑nickel plated connection ends
HB-DJ825 Linear Actuator(Free 3D Prints)
Load: 1000 N–2000 N,
Speed: 6–15 mm/s,
Customizable travel itinerary: 30–1000 mm,
Voltage: 12V, 24V, 36V, 48V DC brushed motors,
Operating conditions: IP66, duty cycle 20%,
Operating temperature: low temperature -10°C or -40°C, high temperature 65°C.
Position feedback: Hall sensors, reed switches, limit signals,
Low noise: approximately 45 dB.
Speed: 6–15 mm/s,
Customizable travel itinerary: 30–1000 mm,
Voltage: 12V, 24V, 36V, 48V DC brushed motors,
Operating conditions: IP66, duty cycle 20%,
Operating temperature: low temperature -10°C or -40°C, high temperature 65°C.
Position feedback: Hall sensors, reed switches, limit signals,
Low noise: approximately 45 dB.
Load: 500 N–2500 N,
Speed: 2.5–22 mm/s,
Customizable travel itinerary: 30–1000 mm,
Voltage: 12V, 24V, 36V, 48V DC brushed motors,
Operating conditions: IP66, duty cycle 20%,
Operating temperature: low temperature -10°C or -40°C, high temperature 65°C.
Position feedback: Hall sensor, limit signals,
Low noise: approximately 45 dB.
Speed: 2.5–22 mm/s,
Customizable travel itinerary: 30–1000 mm,
Voltage: 12V, 24V, 36V, 48V DC brushed motors,
Operating conditions: IP66, duty cycle 20%,
Operating temperature: low temperature -10°C or -40°C, high temperature 65°C.
Position feedback: Hall sensor, limit signals,
Low noise: approximately 45 dB.
● Voltage: 12V/24V
● Low noise of the product
● Maximum load：4000N
● Stroke: 50-600mm (optional)
● Fastest speed: 32mm/s
● Can be applied to massage chair, functional sofa, automatic window opening, medical equipment, etc.
● Low noise electric actuator
● Voltage: 12V/24V
● Stroke：50mm-600mm(optional)
● Noise：30cm measuring distance≤50dB, 1m measuring distance≤40dB
● Speed：5mm-16mm/s
● Maximum load:6000N
● Widely used in various types of light industrial equipment, medical, furniture and other industries.
● Voltage: 12/24V DC
● Speed：The fastest 15mm/s
● Maximum load: 2000N
● Low noise, silent electric actuator
● Voltage: 12V/24V
● Stroke: 50mm-600mm(customizable)
● Fastest speed: 25mm/s
● Stable quality and long service life
● Max. load 6000N
● Can be applied to massage chair, functional sofa, automatic window opening, medical equipment, etc.
Wuxi Hongba Mechanical & Electrical Equipment Co., Ltd.
Add: 5 Lijiang Rd. Xinwu District, Wuxi Jiangsu China
Postcode: 214028
Copyright © 2025 Wuxi Hongba Mechanical & Electrical Equipment Co., Ltd.