HB-DJ829 Electric Push Rod

A. Optional Parameters Rated Load: 250–1,200 N (optional) No-Load Speed: 4–20 mm/s (optional) Input Voltage: 12 V or 24 V DC (optional) Custom Stroke Length: Recommended ≤ 1,000 mm Duty Cycle: 20%; under normal ambient temperature and full-load conditions, continuous operation is recommended for no more than 2 minutes Lead Screw Type: Standard trapezoidal lead screw Motor Type: Standard brushed DC motor b. Standard Protection Built-in bidirectional limit switches that automatically cut off power when the actuator is fully extended or fully retracted Operating Temperature: -10°C to 65°C (optional – optional ultra-low‑temperature protection available down to -40°C) IP66 dust‑ and water‑proof rating, suitable for outdoor use Aluminum alloy body and piston rod, with corrosion‑resistant zinc‑nickel plated connection ends

a. Optional Parameters

Rated load: 250–1,200 N optional

No-load speed: 4.3–20 mm/s, optional!

Input voltage: 12 V or 24 V DC, optional

Customized Itinerary: Recommended ≤ 1,000 mm

Duty cycle: 10%. Under full‑load conditions at room temperature, it is recommended that continuous operation does not exceed 2 minutes.

Lead screw type: Standard trapezoidal lead screw

Motor Type: Standard DC Brushed Motor

b. Standard Protection

Built-in bidirectional limit switches automatically cut off power when fully extended or retracted.

Operating temperature: -10°C to 55°C (optional ultra-low temperature protection available at -40°C).

IP66 dust‑ and water‑proof, suitable for outdoor operations!

Aluminum alloy body and piston rod, with corrosion‑resistant zinc‑nickel plated connection ends.

• Hb-dj825
• high temperature
• DC
• 30–1000 mm
• model
• load
• position
• 6–15 mm
• low temperature
• electric actuator
• 12 V
• 24 V
• low noise
• silent.