Please select
Please select
Duty Cycle 10%-25%【Exposed to Weather】
Duty Cycle 50%-100%【Exposed to Weather】
Please select
up one level
≤ 2500N
≤ 4500N
≤ 8KN
≤ 15KN
≤ 20KN
Precise Control【Servo Motor】
Standard Control【Brushed/ Brushless DC/ AC Motor】
Please select
up one level
≤ 8KN
≤ 20KN
≤ 8KN
≤ 20KN
Dual-axis bracket - 10 square meters
Structure: Dual-axis tracking bracket
Bracket area range: 5-15 square meters
Azimuth tracking: ±100°
Elevation tracking: 0-50°
Maximum wind resistance: Meets project requirements
Drive type: Dual push rod or push rod + rotation
Pile foundation type: Steel piles
Bracket area range: 5-15 square meters
Azimuth tracking: ±100°
Elevation tracking: 0-50°
Maximum wind resistance: Meets project requirements
Drive type: Dual push rod or push rod + rotation
Pile foundation type: Steel piles
Photothermal bracket - 30 square meters
Structure: Dual-axis tracking bracket
Azimuth tracking: ±150°
Elevation tracking: 0-90°
Maximum wind resistance: Based on wind tunnel data
Drive type: Dual push rod or single push rod + rotation
Foundation type: Steel piles
Azimuth tracking: ±150°
Elevation tracking: 0-90°
Maximum wind resistance: Based on wind tunnel data
Drive type: Dual push rod or single push rod + rotation
Foundation type: Steel piles
Tracking Type: Single-axis tracking system
Tracking Angle Range: ± 45°
Main Shaft Tilt Angle: 10°~30°
Power Supply Method: AC or string power supply
Signal Mode: 485 full closed-loop control
Foundation Type: Driven pile / Cement foundation
Structural Material: Hot-dip galvanized / Pre-galvanized / Magnesium-aluminum-zinc coated steel
Wind Resistance Design: According to project site wind speed
Tracking Angle Range: ± 45°
Main Shaft Tilt Angle: 10°~30°
Power Supply Method: AC or string power supply
Signal Mode: 485 full closed-loop control
Foundation Type: Driven pile / Cement foundation
Structural Material: Hot-dip galvanized / Pre-galvanized / Magnesium-aluminum-zinc coated steel
Wind Resistance Design: According to project site wind speed
Single-axis tracking mounting structure with tilt angle
Tracking Type: Inclined Single-Axis Tracking System
Tracking Angle Range: ± 45°
Panel Tilt Range: 7-15°
Power Take-off Method: AC or String Take-off
Signal Mode: 485 Full Closed-Loop Control
Foundation Type: Driven Pile / Cast-in-place Pile / Cement Foundation
Structural Material: Hot-dip Galvanized / Pre-galvanized / Magnesium Aluminum Zinc Coated Steel
Wind Resistance Design: Based on project site wind speed
Tracking Angle Range: ± 45°
Panel Tilt Range: 7-15°
Power Take-off Method: AC or String Take-off
Signal Mode: 485 Full Closed-Loop Control
Foundation Type: Driven Pile / Cast-in-place Pile / Cement Foundation
Structural Material: Hot-dip Galvanized / Pre-galvanized / Magnesium Aluminum Zinc Coated Steel
Wind Resistance Design: Based on project site wind speed
Seasonal fixed adjustable bracket
Structural Form: Seasonal Fixed Adjustable Bracket
Angle Adjustment Range: 5°--55°
Adjustment Method: Stepless Electric Adjustment
Maximum Wind Resistance: Meets Project Requirements
Annual Adjustment Frequency: 2-4 times
Foundation Type: Driven Pile / Cast-in-place Pile / Cement Foundation
Relative Power Generation Increase of 5%-10%
Angle Adjustment Range: 5°--55°
Adjustment Method: Stepless Electric Adjustment
Maximum Wind Resistance: Meets Project Requirements
Annual Adjustment Frequency: 2-4 times
Foundation Type: Driven Pile / Cast-in-place Pile / Cement Foundation
Relative Power Generation Increase of 5%-10%
Multi-row, multi-point drive - electrically linked tracking bracket
Tracking Method: Electrically Interlocked Tracking System
Tracking Angle Range: ± 45°
Overall Length Limit of Tracker in North-South Direction: ≤105m
Power Supply Method: AC or String Power Supply
Signal Mode: 485 Full Closed-Loop Control
Compatibility: Main and auxiliary brackets are mutually compatible
Pile Foundation Type: Driven Pile / Cast-in-place Pile / Cement Foundation
Tracking Angle Range: ± 45°
Overall Length Limit of Tracker in North-South Direction: ≤105m
Power Supply Method: AC or String Power Supply
Signal Mode: 485 Full Closed-Loop Control
Compatibility: Main and auxiliary brackets are mutually compatible
Pile Foundation Type: Driven Pile / Cast-in-place Pile / Cement Foundation
Single-row multi-point drive - electrical linkage tracking bracket
Tracking Method: Electrically Interlocked Tracking System
Tracking Angle Range: ± 45°
Overall Length Limit of Tracker in North-South Direction: ≤105m
Power Supply Method: AC or String Power Supply
Signal Mode: 485 Full Closed-Loop Control
Drive Type: Servo Stepper Motor
Foundation Type: Driven Pile / Cast-in-place Pile / Cement Foundation
Tracking Angle Range: ± 45°
Overall Length Limit of Tracker in North-South Direction: ≤105m
Power Supply Method: AC or String Power Supply
Signal Mode: 485 Full Closed-Loop Control
Drive Type: Servo Stepper Motor
Foundation Type: Driven Pile / Cast-in-place Pile / Cement Foundation
Dynamic load: 28KN/35KN
Maximum static load: 70KN/80KN
Linear velocity: 1.5mm/s, 1.0mm/s
Stroke: 500-1000 (optional)
Drive motor: Brushed motor/Stepper motor/Brushless motor
Voltage: 24-48VDC
Operating temperature: -40℃—+60℃
Design life: 30 years
Maximum static load: 70KN/80KN
Linear velocity: 1.5mm/s, 1.0mm/s
Stroke: 500-1000 (optional)
Drive motor: Brushed motor/Stepper motor/Brushless motor
Voltage: 24-48VDC
Operating temperature: -40℃—+60℃
Design life: 30 years
Maximum dynamic load: 16KN/25KN
Maximum static load: 45KN/60KN
Linear velocity: 0.8-1.4mm/s
Stroke: 300-900mm
Drive motor: Servo stepping motor/Brushless motor
Voltage: 24VDC, 36VDC
Operating temperature: -40℃-+60℃
Design life: 30 years
Maximum static load: 45KN/60KN
Linear velocity: 0.8-1.4mm/s
Stroke: 300-900mm
Drive motor: Servo stepping motor/Brushless motor
Voltage: 24VDC, 36VDC
Operating temperature: -40℃-+60℃
Design life: 30 years
Dynamic load: 28KN/35KN
Maximum static load: 70KN/80KN
Linear velocity: 1.5mm/s, 1.0mm/s
Stroke: 500-1000 (optional)
Drive motor: Brushed motor/Stepper motor/Brushless motor
Voltage: 24-48VDC
Operating temperature: -40℃—+60℃
Design life: 30 years
Maximum static load: 70KN/80KN
Linear velocity: 1.5mm/s, 1.0mm/s
Stroke: 500-1000 (optional)
Drive motor: Brushed motor/Stepper motor/Brushless motor
Voltage: 24-48VDC
Operating temperature: -40℃—+60℃
Design life: 30 years
Maximum dynamic load: 16KN/25KN
Maximum static load: 45KN/60KN
Linear velocity: 0.8-1.4mm/s
Stroke: 300-900mm
Drive motor: Servo stepping motor/Brushless motor
Voltage: 24VDC, 36VDC
Operating temperature: -40℃-+60℃
Design life: 30 years
Maximum static load: 45KN/60KN
Linear velocity: 0.8-1.4mm/s
Stroke: 300-900mm
Drive motor: Servo stepping motor/Brushless motor
Voltage: 24VDC, 36VDC
Operating temperature: -40℃-+60℃
Design life: 30 years
Dynamic load: 28KN/35KN
Maximum static load: 70KN/80KN
Linear velocity: 1.5mm/s, 1.0mm/s
Stroke: 500-1000 (optional)
Drive motor: Brushed motor/Stepper motor/Brushless motor
Voltage: 24-48VDC
Operating temperature: -40℃—+60℃
Design life: 30 years
Maximum static load: 70KN/80KN
Linear velocity: 1.5mm/s, 1.0mm/s
Stroke: 500-1000 (optional)
Drive motor: Brushed motor/Stepper motor/Brushless motor
Voltage: 24-48VDC
Operating temperature: -40℃—+60℃
Design life: 30 years
Maximum dynamic load: 16KN/25KN
Maximum static load: 45KN/60KN
Linear velocity: 0.8-1.4mm/s
Stroke: 300-900mm
Drive motor: Servo stepping motor/Brushless motor
Voltage: 24VDC, 36VDC
Operating temperature: -40℃-+60℃
Design life: 30 years
Maximum static load: 45KN/60KN
Linear velocity: 0.8-1.4mm/s
Stroke: 300-900mm
Drive motor: Servo stepping motor/Brushless motor
Voltage: 24VDC, 36VDC
Operating temperature: -40℃-+60℃
Design life: 30 years
Dynamic load: 28KN/35KN
Maximum static load: 70KN/80KN
Linear velocity: 1.5mm/s, 1.0mm/s
Stroke: 500-1000 (optional)
Drive motor: Brushed motor/Stepper motor/Brushless motor
Voltage: 24-48VDC
Operating temperature: -40℃—+60℃
Design life: 30 years
Maximum static load: 70KN/80KN
Linear velocity: 1.5mm/s, 1.0mm/s
Stroke: 500-1000 (optional)
Drive motor: Brushed motor/Stepper motor/Brushless motor
Voltage: 24-48VDC
Operating temperature: -40℃—+60℃
Design life: 30 years
Maximum dynamic load: 16KN/25KN
Maximum static load: 45KN/60KN
Linear velocity: 0.8-1.4mm/s
Stroke: 300-900mm
Drive motor: Servo stepping motor/Brushless motor
Voltage: 24VDC, 36VDC
Operating temperature: -40℃-+60℃
Design life: 30 years
Maximum static load: 45KN/60KN
Linear velocity: 0.8-1.4mm/s
Stroke: 300-900mm
Drive motor: Servo stepping motor/Brushless motor
Voltage: 24VDC, 36VDC
Operating temperature: -40℃-+60℃
Design life: 30 years
Maximum dynamic load: 16KN/25KN
Maximum static load: 45KN/60KN
Linear velocity: 0.8-1.4mm/s
Stroke: 300-900mm
Drive motor: Servo stepping motor/Brushless motor
Voltage: 24VDC, 36VDC
Operating temperature: -40℃-+60℃
Design life: 30 years
Maximum static load: 45KN/60KN
Linear velocity: 0.8-1.4mm/s
Stroke: 300-900mm
Drive motor: Servo stepping motor/Brushless motor
Voltage: 24VDC, 36VDC
Operating temperature: -40℃-+60℃
Design life: 30 years
Wuxi Hongba Mechanical & Electrical Equipment Co., Ltd.
Add: 5 Lijiang Rd. Xinwu District, Wuxi Jiangsu China
Postcode: 214028
Copyright © 2025 Wuxi Hongba Mechanical & Electrical Equipment Co., Ltd.